Does Sleeping in AC Cause Breathing Problems?

We usually don’t like to spend even an hour without AC during summer. Especially at night, we tend to sleep with the AC On. People are not aware of the harmful effect AC can have on their health if they spend most of their time under the cooling AC.

After AC installation in Bowling Green, we don’t turn our AC off until we are out. AC does have filters and multiple benefits, but as every coin has two sides, AC also has harmful effects. However, these problems have easy solutions, and we don’t have to stop using AC to prevent health issues. We have to be careful about the symptoms and how long to use AC.

Health Problems Due to AC

  • Respiratory problem

A clogged air filter gives rise to bacteria, and the moisture level inside AC also increases. This high moisture level gives birth to fungus and germs. The harmful components later circulate throughout our room.

We will feel the symptoms like coughing, breathing issues, sore throat, etc. Those already who have asthma or any respiratory infections will suffer more. If there is no cross-ventilation in the AC-enclosed room, breathing the stale air will also cause respiratory issues. The worst effect of this can be Hypersensitivity pneumonitis.

  • Infection

With the respiratory system getting weak, we can also have an infection. The rarest and the most dangerous infection due to AC is legionellosis.

When we breathe stale or unfiltered air, we can have digestion-related infections too. Nausea is one of its symptoms.

  • Headaches

Spending more time in an AC-installed room can lead to a headache. When the temperature around us keeps on changing, severe headaches become one of the common problems.

  • Skin related issues

The unfiltered air can lead to irritation in the eyes, itching, and allergies. In addition to this, a dehumidifier absorbs moisture from the air, and absorbs the moisture from our skin and body, leading to dry skin, hair loss, or dehydration.

Ways to Prevent The Harmful Effects of AC

  • If your AC uses water, do not let it stagnant
  • Clean the filters frequently
  • Drain lines must be cleaned
  • Never skip annual maintenance
  • Allow cross-ventilation in the AC room
  • Install a smart thermostat and set the timer at night so that it automatically stops after cooling the room
  • Do not spend the whole day in the AC rooms
  • Whenever you feel an increased humidity level or foul smell, call a technician

Proper AC maintenance will enhance the efficiency of AC filters and air quality. For this reason, you should never avoid the annual servicing of your air conditioning system.

For AC maintenance in Bowling GreenCarter Heating and Cooling service can help you with this. Though we are based in Bowling Green, our services are not limited to this area only.

We serve in Glasgow, Russellville, Franklin, and surrounding areas. We are known for our understanding and cooperative technicians, professionalism, and service quality. Call us now and give us a chance to serve you with our highly efficient services.

Tips To Troubleshoot a Furnace Blowing Cold Air

The furnace is used as a main component of the central heating system. In cold weather, it proves to be a boon for everybody. But if it starts blowing cold air instead of hot air, the whole purpose of the furnace becomes useless. Therefore to avoid the chills of the weather, the furnace needs to be fixed as soon as possible.

There can be several issues behind this malfunctioning, and some of them can easily be solved by anyone. So, here are five basic furnace troubleshooting solutions that you can use to solve the heating problem.

What Should You Do?

  • Check The Thermostat’s Fan Settings

Confirm that the fan settings are set to AUTO and not ON. It will ensure that the blower runs only when the furnace blows hot air, which means that the blower will blow air each second, whether hot or not.

  • Next, Check The Air Filter of The Furnace

If you find the air filter filled with dirt, you need to replace it, as it can clog the airflow, causing overheating. Overheating causes the furnace burners to trip off to prevent the exchanger from cracking.

If you cannot replace it yourself, you can call the professionals for furnace repair, Bowling Green, KY.

  • Check The Pilot Light

Generally, the older furnaces face the issue of the pilot light going out. Try to relight it by finding the pilot light assembly and switching off its reset toggle. First, turn the thermostat from HEAT to OFF and find the pilot light.

Then switch the off button on the reset switch. After waiting for a few minutes, switch the pilot button on the Reset switch. As you press the pilot button, hold a lighter to the pilot until the flame lights. The ON button on the reset switch and turn the furnace on at the thermostat at the last switch.

  • Check The Condensate Line

The condensate line may be clogged if you see water around the furnace. If it is clogged, water stores into the furnace, which causes the switch to shut down. Causes for clogging of the condensate can be various, like dust, dirt, and ice.

You can unclog the condensate line by using pan tablets and installing new tubing. If the clogging is due to ice, you can solve the problem by wrapping the condensate line with heat tape.

  • Check The Furnace Control Panel

The electronic unit of the control panel can have malfunctioned. You can resolve it by switching off the furnace’s power and waiting for a few minutes. Then turn the switch ON.

  • Check For The Leaking Ducts

Leaks in the ducts can cause the heat to escape in the surroundings. Thus, it doesn’t feel warm enough. You can pinpoint these leaks temporarily. Then you can call the technicians for repair.

If you are looking for a heating service at Bowling Green, we at Carter Heating and Cooling are here to help and provide you services and repair. Call us at 2702821183 or drop us a mail here.

Safeguard Your HVAC This Snowstorm

Winter is always a season of festivities and relaxation for the family, But with the advent of snow and happy holidays comes the treacherous snowstorms that often wreak havoc on your Heating, Ventilation, and Air Conditioning (HVAC) system.

You can save yourself a lot of time, money, and resources by following these six simple steps.

  • Prevention is Always Better Than Repair

A bit of foresight and careful inspection of your HVAC system can go a long way in reducing the damage to your system while also increasing the lifetime of the components. Be sure to examine your system before and after a snowstorm to ensure its integrity.

  • Warm Up The Pipes

Many people have often found themselves searching for: furnace replacement near me. Often it is due to the freezing up of HVAC pipes during heavy snowstorms; this is solved by defrosting the pipes from time to time.

Some simple steps include using space heaters and hair dryers to warm the frozen pipes, which take just 30-40 minutes and can save you work hours in the future.

  • Clean Vents, Happy Vents

Strong winds bring debris such as leaves, twigs, old newspapers with them; these have a nasty tendency of clogging up vents that keep the air fresh and healthy in your home.

After a snowstorm, be sure to check all your major and minor vents to ensure that it is free of snow, dirt, or any other debris that can block them from getting access to clean air.

  • With Great Generators Comes Great Power

During snowstorms, there is always a risk of power loss. If your locality is at risk of power failure, you might want to consider investing in a generator.

Generators have a longer return-on-investment than most electronic devices; they also provide your HVAC system with the necessary power, thus preventing any damage due to the sudden power loss.

  • Utilize The Technology

With the advent of artificial intelligence, the ‘smartness’ of our devices has risen dramatically over the past few years. With advanced data research and machine learning algorithms, thermostats can identify the different patterns in a household and make intelligent decisions based on past data.

Smart thermostats are easy to use and are very frugal in their energy use. This efficient use of resources ensures that you can save on the electricity bill without sacrificing comfort.

  • Give Your Pipes a Coat

We love to wrap up in a blanket or sweater during the winter months; the same holds for your pipes and wiring. Insulation helps retain heat much better; this has long-term benefits as it will save on energy loss while keeping your pipes and wiring protected from harsh weather conditions. Insulation also helps in improving the longevity of critical components.

Have you ever searched for an HVAC specialist near me? Worry not! Carter Heating & Cooling is there to provide for your needs. Feel free to call or text us at 2702821183 or drop us a mail here. We have the technical know-how to ensure your HVAC system is ready for this winter.

How Much Does It Cost To Remove Mold From a Furnace?

Mold is a common problem in many households. While many people think mold can grow only if the house is dirty or unsanitary, it is not so. Mold growth can also happen due to environmental factors (like humidity), natural disasters (like flooding), or poor construction (old walls, poor quality wood, etc.) Mold growth is a common problem, and the first thing to remember is that it may not be your fault!

Once you have noticed mold growth, you should get a remedial service as soon as possible. If you have noticed mold growth in your HVAC system, you should isolate the system before calling the remedial service. Many contractors who provide furnace repair in Bowling Green, KY, will be able to help you with the service. Mold removal from a furnace costs between $700 to $6,000. The price of mold removal depends on various factors. Given below are the factors that affect the quotation we provide you.

Factors That Affect Pricing

1. The Unit’s Age:

The furnace’s age is the first thing a contractor considers when encountering mold growth. Older units are more susceptible to mold damage than newer ones. The reason is simple: newer technology is built while keeping these factors in mind. Furthermore, newer units can be repaired easily as compared to the older ones.

2. The Unit’s Make and Model

Contractors who provide heating services in Bowling Green usually consider the make and model because many diverse options are currently in use. Not each model and unit is easy to repair and clean. Therefore, units with complex designs that require contractors to remove more parts usually have higher quotations than those with simpler designs.

3. The Unit’s Use and Condition

All contractors who provide furnace repair in Bowling Green, KY, advocate regular maintenance and use of all HVAC systems in your home. The reason is simple: when your unit is kept in good condition, you are (a) more likely to notice a problem before it compounds, and (b) it is less likely to have mold growth.

However, if your unit hasn’t been maintained according to manufacturer guidelines or if you’ve skipped the bi-annual maintenance requirements, the contractor will have to remove mold and maintain the unit, which increases the charge.

4. The Extent of Growth

The extent of growth also makes a significant difference. Your furnace is connected to the ventilation ducts connected to all other HVAC units in your home. If the mold growth is not spotted in its initial stage, it will have spread to these other parts of your home. For the best results, these units will also need to be cleaned. This increases the price or quotation provided to you.

How Long Should You Wait to Call a Contractor?

We recommend not waiting at all. Once you’ve spotted mold growth, call your contractor immediately to get a remedial service. If you don’t have a contractor, you can call us instead. We provide excellent heating services in Bowling Green and will help you out any time you need. You can start booking your appointment by calling us on (270) 282-1183.

How To Tell If Your Thermostat Needs To Be Replaced

The days are getting shorter, while the nights only grow longer. Winter has arrived! With the rapidly dropping temperature, the need for a fully-functioning furnace has become more evident. Close your eyes and imagine you and your family spending a cozy night in without a care for the chilling cold, and then, suddenly, your thermostat stops working. What could possibly be worse than that?

You and your thermostat are supposed to be best friends during winter. It’s supposed to have your back. So, you must keep an eye out and ensure it is functioning properly.

Signs Telling Your Thermostat Needs to be Replaced

Here are a few tell-tale signs that your thermostat needs to be replaced:

1. Your HVAC Unit Randomly Turns On or Off

The primary role of a thermostat is to communicate with your HVAC unit. How is an HVAC unit supposed to function if it does not know when to increase and decrease the temperature as commanded.

A good analogy to understand the working of this system is: your HVAC system is the brain, and your thermostat is the neuron that transmits information to the brain. Without the neurons, the brain would be clueless and would not know what to do. Similarly, without the thermostat, an HVAC system would fail to function. Contact an HVAC specialist near me to learn more.

2. Malfunctioning Sensor

If it ever occurs to you that the temperature your thermostat is reading might be incorrect, this could be a reason for concern. Having an accurate reader in your thermostat is necessary to ensure that your house doesn’t get too unreasonably hot or cold. It is a measure of control, and a lack of control can lead to chaos.

To verify your suspicions, you can invest in a portable indoor thermometer. If it turns out that your thermostat’s readings are indeed wrong, it’s time to invest in a new thermostat. Look into the furnace replacement near me.

3. High Energy Bills

If you notice that your energy bill is going up every month despite using the same amount of electricity, this could point to an inefficient HVAC unit. And many times, the culprit is the thermostat.

As mentioned in the previous point, an inaccurate thermostat reader can lead to no good. It can cause your machine to overwork and thus, use more electricity than necessary. An HVAC specialist near me can put your doubts to ease.

4. Past its Prime

The most common reason for a thermostat to stop working is that it’s too old and rusty. HVAC systems start deteriorating once they go past the decade-mark. The machines grow tired and weaker from years and years of working, and there comes the point of no return. It’s best to accept when it’s time has come and move on to a better, newer option. Furnace replacement near me is the best route to take.

One such reliable option is Carter Heating & Cooling. We can take care of your thermostat needs with ease. Our company is at the top of the chain, so get your furnace replacement near me from the best!

Energy Efficient Heating Options for Your Home

The range of heating systems accessible today can be fascinating. To meet your demands, all of these systems are available in a variety of types and sizes. Choosing the one suitable for you can be confusing. For additional information on installing or updating a new heating system, contact a company that provides heating service in Bowling Green.

These are the types of efficient home heating systems that you may consider:

1. Central Heating

This is the most often used type of heating. This system often includes an electric heating system that distributes hot water throughout the residence via radiators. There are now even more effective solutions that can cut installation expenses and running expenditures.

2. Ducted Systems

A ducted system is regarded as one of the most energy-efficient heating choices for homes and commercial buildings. Heating oil, natural gas, or even coal can be used to power them. A forced-air furnace is frequently present, which distributes hot air throughout the property via a network of ducts.

A central unit is used to draw heat from the outside air. It’s then blown throughout the house via ducting to outlets. After that, the air is reheated in the inside unit. A thermostat regulates the temperature of the air inside.

The ductwork that may be used for heating and cooling in the winter and summer is an attractive aspect of this system. To achieve this dual-purpose, all required is an air conditioner unit to the system.

3. Reverse Cycle Systems

Air conditioning that performs both heating and cooling duties is known as reverse cycle air conditioning. Unlike other similar systems, this Reverse Air Conditioning technology allows the user to utilize a single device to cool or heat a home in the summer or winter.

When it comes to reverse cycle systems, the word “efficient” will come up repeatedly. Efficient in terms of energy use, cost over time, heating efficiency, and cooling efficiency. They are, without a doubt, one of the most energy-efficient ways to heat a home. 

Modern reverse cycle air conditioning systems are getting increasingly efficient over time, particularly in terms of energy usage and cost, making them an excellent investment in comfort and health. Reverse cycle air conditioners are typically far more efficient than plug-in portable electric heaters, which can be inexpensive to purchase but expensive to operate.

Some Additional Factors To Consider

A variety of functions can assist you in reducing your energy consumption. The ability to set heating zones or thermostat controls on their own is the most significant feature. 

It’s unpleasant to return home to a very chilly house, but it’s also inefficient to leave your heating system running in an empty house. The heating timer function is also very significant. Most modern HVAC systems allow you to set a timer and have the heating turn on as needed.

We can help you in lowering the cost of furnace repair in Bowling Green, KY. To get the best furnace and heating repair in Bowling Green, KY, look for a company that provides to the best of its ability or call us at 2702821183

How To Reset A Furnace After Overheating?

Short cycling occurs when your heater is turned off before it completes its full heating cycle. Your HVAC expert will use the language; therefore, you must understand it. Short cycling occurs when your furnace overheats. Allow it to cool before attempting to restart it.

Although pressing the reset button should restart your furnace, fuel may not start flowing until you complete a different step. Of course, the only fuel used by an electric furnace is electricity, but to be cautious, turn it off before restarting it.

Resetting A Furnace After It Overheats

When a furnace is overheated, the reset button pulls out, and you must press it back in to restart the furnace, but there is a certain protocol to follow. The following are the steps for resetting an electric, gas, or oil furnace –

1. Restarting An Electric Furnace With A Reset Button

If the furnace doesn’t have a power button, turn off the circuit breaker that controls it, open the blower housing, and find the reset button on the side of the blower motor. Press it in until it clicks, then turn on the breaker to reestablish electricity to the furnace. When the furnace gets a signal from the thermostat, it should automatically start.

2.Restarting A Gas Furnace With A Reset Button

  • Check that the pilot light is turned off. If it isn’t, flip the gas control switch to “off” and ensure the pilot light is turned off.
  • Reduce the thermostat temperature as much down as you can
  • Switch off the furnace’s electricity supply by flipping the breaker in the circuit box if the furnace is equipped with electrical ignition.
  • Cut off the furnace’s main gas supply while keeping the pilot gas supply line turned on.
  • Hold a lit match to the pilot flame jet’s aperture to relight the pilot light.
  • Reset the circuit breaker, and then reactivate the main gas supply.
  • Hold down the reset button for roughly 30 seconds while increasing the temperature on the thermostat.

3. Restarting An Oil Furnace With A Reset Button

  • Before resetting an oil furnace, determine the cause of the cutoff. If you run out of oil, you will first need to fill the tank and bleed the fuel line.
  • Locate the bleeder valve. It’s a tiny black box beside the burner with fuel lines going into it in the latter instance.
  • Install a large container to capture at least 1 quart of fuel beneath the valve, or connect tubing from the fuel pump to a 1-quart plastic bottle.

It is a rare homeowner who can manage furnace repair and maintenance without expert assistance — therefore, do not try to DIY to avoid harm. Making the wrong move when flammable and volatile fuels are available, and doing electrical repairs when you are unfamiliar with the necessary procedures, can have catastrophic implications. When you have issues with your heating system and do not feel secure enough to perform the repairs yourself, do not be afraid to ask for help.

Looking for a furnace replacement service near you? Contact Carter Heating & Cooling. They provide the best heating service in Bowling Green. Call (270) 282-1183.

Should You Hit The Reset Button On Your Furnace?

The function of a furnace’s reset button is to shut it down before it trips your circuit breaker. The reset button on your furnace is an easy way to address any short-term problems. However, if your furnace continually shuts down and resets, it indicates a more serious issue. When your reset button appears for the first time, your initial instinct should be to press it.

Troubleshooting Reset Problem

Begin by attempting to reset your furnace once. If you have the same difficulty, the problem might be caused by something that a reset button cannot handle. If you feel compelled to tap it again, do not press it more than twice. Then you need to go through a troubleshooting process to make sure that your furnace works properly. Below are a few troubleshooting steps because of which your furnace might need constant resets:

  • Turn Off The Furnace

Before beginning the troubleshooting process, turn off the electric supply to your furnace.

  • Check Fuel Level

Refilling your oil is one of the most difficult things to remember if you are used to a gas furnace. If you utilize propane heating methods, the same rationale applies. Begin by inspecting your oil tank. If it is empty, refill.

  • Check Flame Sensor

If your reset button pops up, again and again, the flame sensor could be the issue. Flame sensors have an unhealthy habit of getting filthy. It is preferable if you make a routine of inspecting and cleaning your flame sensor every six months. They can be cleaned with anything from a hard brush to steel wool.

Your owner’s handbook may have a different view, so make sure to consult it before cleaning. Checking your burner is also synonymous with checking your flame sensor. While you are there, make sure no dust or rust is surrounding the flame sensor. Anything in this region has the potential to trigger an ignition failure.

  • Inspect Airflow

If your furnace is unable to breathe, it will be unable to create the air required to ignite. Check the air filter and see if it has turned grey. The filter might need a change. Occasionally, a vacuum can be used to clean the filter. Remove as much dust as possible.

  • Inspect The Fuel Line

Examine the fuel line. A blocked fuel pipe is a very typical problem with a furnace. Check that none of the valves along your fuel line are closed. Typically, this indicates that the valve is pointing in the incorrect direction. Turn the valve until it is open. The flow should be audible once again. Do not reopen the flow while the furnace is still running; this might result in fuel difficulties.

  • Check The Thermostat

A thermostat instructs your furnace when to turn on and off. Examine your thermostat to determine if it has any problem codes. If no error codes appear, make sure the thermostat is set to your chosen temperature.

If it is very low, the thermostat will turn off repeatedly. This, however, does not indicate that you should restart your furnace. If adjusting the temperature does not work, clean the surface and the interior. Wires encrusted with muck may not communicate effectively with your furnace.

  • Check Corrosion And Old Age

Older systems may not age well, resulting in serious problems if not addressed promptly. If your system is older, rust is an indication that it needs to be replaced. Corroded metal might result in an unintentional leak and a hazardous scenario.

If your system is recent, rust may indicate that it has been exposed to too much humidity. Examine the area for any adjacent leaks and fix them if necessary. Consult a technician to discover whether any detailed repairs are required.

Searching for an HVAC specialist near you? Contact Carter Heating & Cooling. We provide heating service in Bowling Green. Call 2702821183

Five Things To Avoid For Your Air Conditioner To Run Smoothly

The demand for air conditioners is high during the summer season, but people neglect to care about the appliance and often pay expensive bills. If your air conditioner is frail, healthy, and running at its optimal level, it is crucial to avoid certain things. The following are five simple things to know for your AC running smoothly, all season long.

1. Incorrect size of air conditioner

When you purchase an air conditioner, always pick them as per the size of your room. This one parameter is usually avoided by many which leads to malfunctioning in an air conditioner.

Disadvantages of purchasing a large air conditioner

  • It consumes more energy resulting in high utility bills.
  • The temperature changes lead to multiple changes in an air conditioner impacting its efficiency.

Disadvantages of purchasing a small air conditioner

  • It needs more time to cool the room.
  • The unnecessary burden on the condenser will impact the efficiency of the condenser.

Thus, an appropriate size air conditioner will give you the best returns on the price you have paid.

2. Untimely maintenance and replacement of air filters

The best way to keep the air conditioner in check is to keep it clean and well maintained. You should never skip routine checkups and maintenance of air filters to avoid expensive affairs. If your air filter gets clogged with dirt and dust, it will obstruct the airflow and impact indoor air quality.

Depending upon the air filter type, you must consider replacing them every 30-90 days. You cannot expect them to run efficiently throughout the season without replacing them. If you are experiencing any issues with your air filter, our team for AC repair in Bowling Green will help you resolve all the problems.

3. Air conditioner usage

Overuse and underuse of air conditioners both impact its efficiency. If your air conditioner is running all the time, it will lead to high energy consumption and utility bills.

Under usage of air conditioners leads to the development of mold inside the unit that affects the functioning of the air conditioner and impacts its good health.

4. Incorrect thermostat settings

You should regulate the thermostat setting as per the temperature of the room. The lower efficiency of the air conditioner is due to lower thermostat settings.

When the thermostat setting is low, it creates a heavy load on the air conditioner unit and the system skips the temperature you had set leading to more power wastage.

5. Unclean outdoor unit

The outdoor condenser unit often gets accumulated with dust particles that obstruct the airflow. Always keep the outdoor unit in a shadowy place to avoid the settling of dust particles. If the outdoor unit is left uncovered during winters, it leads to insufficient airflow and inadequate airflow is the root cause of many AC problems.

Carter Heating and Cooling – certified and skilled technicians are known for their best quality work in heating, ductless, and AC services in Bowling Green. If you are looking for the best and affordable maintenance plans for your cooling system, connect with the team on 2702821183

Things You Should Know About AC Filters

If you are in Bowling Green, you know how air conditioners benefit you in your everyday life. Changing air filters now and then must be a hassle for you. But knowing about the issues and benefits related to it will help you understand them better.

Types Of Air Filters

  • Flat air filters

You might not know but, flat air filters are disposable ones and, their replacement is every 30 days. They are known for their capability to capture large particles like lint, dander, and dust.

  • Pleated air filters

Pleated air filters are also known as extended surface filters. They are best in capturing small particles such as bacteria and mold. If you own pleated air filters, change them every 90 days. Replacement of air filters is expensive and requires a skilled technician to avoid multiple issues further. If you are looking for AC installation in Bowling Green, we are available with our well-trained technicians.

  • Electronic air filters

These filters are best in capturing microscopic particles such as dust and smoke. If you compare to other filters, electronic air filters improve indoor air quality by 95%. The trapping process is similar to other filters, except that the microscopic particles are captured with electricity when they contact the air filter.

  • Washable air filters

If you are among those who purchase eco-friendly items, the washable air filter is a suitable option for you. They are 2-3 times more expensive than flat filters but last for five years with proper care and maintenance.

Benefits Associated With Air Filters

If you take care of the filters and replace them timely, they come up with multiple benefits:

  • Utility bills

If you are worried about utility bills, check the air filter once. A clogged air filter will restrict the airflow and will demand more energy to work efficiently. While replacing them routinely will help in reducing energy consumption and utility bills.

  • Air quality

The air filter is like a guardian. It protects the cooling system from dust, and mold which improves indoor air quality.

  • Protects your cooling system

When dust or debris gets accumulated in the ducts, they harm the cooling system and often lead to expensive maintenance and failure of other components. The air filter acts as a protector for your cooling system as it does not allow the accumulation of dust and dirt in the duct area.

  • Eco friendly

The average home emits twice as many greenhouse gas emissions as the average car. When the air filter is not working efficiently, your HVAC system consumes more energy to cool your room. You can avoid this by not skipping any air filter routine checkup.

  • Air filter rating

A standard rating system known as Minimum Efficiency Reporting Value (MERV) rates the air filter on a scale of 1 to 20. For example, MERV 8 is more efficient than MERV 6.

From AC installation, repair to AC maintenance in Bowling Green, Carter Heating and Cooling technicians are skilled in handling every small or big issue with your cooling system. Call 24*7 support team on (270) 282-1183.